I received my Kami Doorbell, wired AC and hooked up the chime connector. The camera is offline and I cannot keep it online. I also tried battery made and it is not notifying my cell phone. I tried to call support and got no answer. How can I get help with this issue? I am very frustrated and regretting this purchase right now.
I have other YI cameras and had favorable comments until this point.
Hey @elbecker thanks for coming to the forum in regards to this issue. I am sorry to hear that you are having issue with your doorbell going offline.
Have you taken a look at our dedicated thread for this very topic? <
Kami Doorbell - Power Options
Please take a look at this thread. I will always send you a direct message in regards to your connection issues…
Many thanks for your patience and understanding.
Very disappointed. I own four other Yi cameras which work well. My new doorbell is a failure. I have followed all the suggestions on the forum with no positive result. Losing connection within minutes. Now it won’t reset. Now I see a very high percentage of bad reviews. What can be done to rectify the situation?
Hey @Darylmccall I am deeply sorry to hear you’re having issues with the your doorbell. We have confirmation from a number of users who had the same problem as you, that all is working after our most recent firmware update.
I am going to send you a direct message about this so we can get to the bottom of it quickly so you can enjoy your kami doorbell.
Thanks for your patience and understanding.
Now it will not reset. When I initially installed it started a firnware download twice. The first stopped at 85% complete. The second completed the download but failed during tne install step.
Thank you for the information. Did you see my message in your forum inbox?
I’ve sent a list of trouble shooting questions. At your earliest convenience, take a look and send your feedback. We will get this taken care of for you 
How can I do a firmware update. Is the update going to the app or to the doorbell camera? The current situation is that the camera will not power on and will not reset.
Hi Steven,
I have resolved the issue with the camera going offline by performing the firmware upgrade.
My new issue is that when I have motion detection turned on, the doorbell is alerting when there is no motion at all. I have the motion detection areas set to 3 out of the 4 quadrants, so that it should only capture the steps in front of my home. I have been using the "not a person’ button to teach it that no person is detected but it does not seem to help. I have now turned off the motion detection but then I have not recording what so ever of what is going on . I defeats the purpose of the doorbell cam.
I know that the cloud plan I am signed up for is for motion detection. Is there a plan that I can have just the doorbell cam on and then I can leave the other YI cameras I have on the motion plan?
Is there a support number that I can call to talk to someone rather than using this forum? It would be easier to work through these questions in person.
Thank you.
Hey @Darylmccall I sent you some more information about updating the firmware and questions about the reset. I’ll keep my eye out for your response.
Hey @elbecker Thanks for coming to the community for a little more troubleshooting information. I am glad to hear the connection challenges are resolved but not happy to hear that the motion detection has been so sensitive 
Let me follow up with our team on this one for a little more information as to what we can do to reduce the sensitivity on the app level and for any more feedback from the team.
Many thanks for your patience and understanding while we resolve this issue.
Hello I am one of last year’s beta doorbell testers. The doorbell has been a great addition to my Yi home cameras, however for the past three days the camera is randomly going offline. I have to get the doorbell camera back online and then it’s good for about 10 hours give or take an hour or two and then it’s off-line again. So today I decided to reset it when I deleted the camera from my list and then went through the necessary steps to add it back on, it does not register. It does not say waiting to be paired there’s nothing. It’s as if it’s completely dead! I did fully charge the battery and made sure it was seated correctly. As a beta tester my camera did not come with any instructions for set up it was through an email that I no longer have. But as many times as I have done this I am sure that I am completing the correct steps. Is this a known problem?
Hey @BrandenB Thanks for reporting this. I apologize for any inconvenience as a result. I will bring this to our support and engineering teams attention immediately. I will update you later this afternoon with more information.
Your patience is greatly appreciated. I will be in touch.
I did get it working and got it reset. I went through recharging the battery again for about another 12 hours and left the camera without power for about 24 hours and re-inserted the battery and everything seems to be working fine now it’s been up and running for about 24 hours with no fault. I will report if it goes down again or off-line again within the next couple days. Thank you!
My Kami doorbell needs to be reset to connect to router then it only last a few days and requires another reset to get it back online. This is the cycle. Currently its out again and been out for 2 days. Its not connected to doorbell just running on battery. Router is about 8 feet away inside house with a glass door in between them. I updated the firmware a couple of resets ago but problem remains. Any updates on this before I reset it again?
@jbonetti, did you managed to fix your issue? I am having the same problem and am wondering how to fix that.