How to RESET and LOGIN to your YI Home Camera

[YITechnology]

𝗡𝗲𝗲𝗱 𝘁𝗼 𝗥𝗲𝘀𝗲𝘁 𝘆𝗼𝘂𝗿 𝗖𝗮𝗺𝗲𝗿𝗮 𝗮𝗻𝗱 𝗰𝗼𝗻𝗻𝗲𝗰𝘁 𝘁𝗼 𝘆𝗼𝘂𝗿 𝗬𝗜 𝗛𝗼𝗺𝗲 𝗰𝗮𝗺𝗲𝗿𝗮𝘀?
𝘈𝘳𝘦 𝘺𝘰𝘶 𝘳𝘦𝘤𝘦𝘯𝘵𝘭𝘺 𝘤𝘩𝘢𝘯𝘨𝘪𝘯𝘨 𝘺𝘰𝘶𝘳 𝘞𝘪-𝘍𝘪 𝘤𝘰𝘯𝘯𝘦𝘤𝘵𝘪𝘰𝘯?
𝘋𝘪𝘥 𝘺𝘰𝘶 𝘶𝘯𝘱𝘭𝘶𝘨 𝘵𝘩𝘦 𝘤𝘢𝘮𝘦𝘳𝘢 𝘣𝘺 𝘮𝘪𝘴𝘵𝘢𝘬𝘦 𝘢𝘯𝘥 𝘯𝘰𝘸 𝘵𝘩𝘦 𝘤𝘢𝘮𝘦𝘳𝘢 𝘪𝘴 𝘰𝘧𝘧𝘭𝘪𝘯𝘦?
𝘈𝘳𝘦 𝘺𝘰𝘶 𝘤𝘳𝘦𝘢𝘵𝘪𝘯𝘨 𝘢 𝘯𝘦𝘸 𝘶𝘴𝘦𝘳𝘯𝘢𝘮𝘦 𝘢𝘯𝘥 𝘭𝘰𝘨𝘪𝘯?
.
Well, don’t panic, you can try to reset your camera and re-connect using your new wifi password/ account.

Use a thin needle or pin to reset the camera.
The reset button is located on the upper left side of the QR code on the backside of the camera or you may need to remove the back cover of your camera (depending on your device version).
Please hold down on the reset button until the yellow light turns on. The reset is successful when the yellow light is on or you hear the voice “Reset is successful”.
.
Watch the video tutorial on 𝐇𝐨𝐰 𝐭𝐨 𝐑𝐞𝐬𝐞𝐭 𝐲𝐨𝐮𝐫 𝐂𝐚𝐦𝐞𝐫𝐚: https://youtu.be/5DnkhLiZICc
.
.
𝗜𝗺𝗽𝗼𝗿𝘁𝗮𝗻𝘁 𝗻𝗼𝘁𝗲 𝘁𝗼 𝘀𝗲𝘁 𝘂𝗽 𝘁𝗵𝗲 𝗪𝗶-𝗙𝗶 𝗻𝗲𝘁𝘄𝗼𝗿𝗸.

1.Bandwith
Depending on your network bandwidth and latency, you can choose different picture quality and bitrate (Standard/HD/Auto) to keep the camera connected.
.
2.Router configuration

• 1. YI home camera currently supports only 2.4Ghz band, it does not support 5Ghz band Wi-Fi
• 2. Ensure that the Wi-Fi name is in English letters and numbers and the password does not include special signs.
• 3. Ensure that the router encryption mode is WPA/WPA2
• 4. Open the QOS in Advanced settings, set the device at the highest setting
• 5. Turn off the wireless access control on the black and white list and cancel the option of black and white list
• 6. Turn off the AP isolation in the setting of the router

.
Watch the video tutorial on 𝐖𝐡𝐚𝐭 𝐓𝐨 𝐃𝐨 𝐈𝐟 𝐖𝐈𝐅𝐈 𝐩𝐚𝐬𝐬𝐰𝐨𝐫𝐝 𝐄𝐫𝐫𝐨𝐫? here: https://youtu.be/96V2eI_tGAc
.
Watch the video tutorial on 𝐂𝐫𝐞𝐚𝐭𝐢𝐧𝐠 𝐭𝐡𝐞 𝐘𝐈 𝐇𝐨𝐦𝐞 𝐀𝐜𝐜𝐨𝐮𝐧𝐭: https://youtu.be/jEoY7KLq4Ns
.
If you like this message, please don’t forget to click ‘LIKE’ and drop your comment below.
.
Thank you and have a great day!

DinaFromYI